Saturday, 1 October 2016

3D Reindeer Barn Christmas Village Ornament Pattern

Latest bead pattern just added is 3D Reindeer Barn Christmas Village Ornament Pattern at http://www.threadabead.com/4662/1/3D-Reindeer-Barn-Christmas-Village-Ornament-Pattern-Bead-Pattern

Reindeer Barn is the third in a series of 3D ornaments that make up the ThreadABead Christmas Village. Reindeer are so important in Christmas village and are kept well looked after in their specially built barn! The barn is a wooden slatted building with candy cane colored trimmings and a snow clad rood. There is a reindeer hanging out of his stable door checking on the goings on in the village whilst another reindeer is around the back eating carrots that an elf is bringing to him. Around the side see another elf making last minute adjustments to Santa's sleigh. The 3D Barn has been designed to either hang from a tree using ribbon/thread and the special chimney loop or with its flat bottom it can sit on a mantle piece as part of a winter village scene. Made using Round Peyote and Odd Count Peyote the Tower takes around 8 hours to bead. As usual with ThreadABead featured patterns we give full detailed photographic instructions and in this pattern there are 51 detailed steps, making this pattern even suitable for beginners to beading. Please note the pattern may not work with any other size and type of beads. There are 15 colours in total and the finished beadwork is approximately 3.75cm (w) x 3.75(d) x 3.75 (h) cm Wadding is optional and a no tangle thread bobbin is useful. If the beadwork is to be used as an ornament some ribbon/thread will be needed to hang the beadwork from. The bead pattern supplied is 19 pages and includes a full colour photo instructions and coloured pattern chart where needed.

Friday, 30 September 2016

Halloween Witch Tube Ornament Pattern

Beading latest pattern Halloween Witch Tube Ornament Pattern from http://www.threadabead.com/4663/1/Halloween-Witch-Tube-Ornament-Pattern-Bead-Pattern

The Witch tube ornament is a simple and cute idea! The Witch design is beaded around a plastic hang tube (the ones which are a lot of beads such as delicas are sold in – you may have some lying around unused!). The ornament can be opened using the top cap and items placed inside and hung using the Halloween striped hanging loop. The witch is holding a star wand ready to preform magic, as you turn the tube around a little pumpkin and skull can be seen on the ground at the back of the tube. So what should you put inside your tube? Well that's up to you! Here we have added orange TicTac sweets, but other sweets, letters, money or even beads will work! This Witch Letter Tube bead pattern is made using Japanese Miyuki size 11 Delica beads and round peyote is used. It is assumed the beader will be familiar with round peyote, however full instructions are given. Please note the pattern may not work with any other size and type of beads. There are 13 colours in total and the finished beadwork is approximately 7 cm x 2.25 cm. Additionally 1 x 8mm crystal ab and a Plastic Tube With Hang Cap 2 inches x 9/16 inch is also required (available from www.threadabead.com - our ref: 939) The bead pattern supplied is 14 pages and includes a colour chart of suggested delicas, a colour pattern and a numbered coloured pattern.

Thursday, 29 September 2016

Skeleton Pen Topper Pattern

Skeleton Pen Topper Pattern bead pattern http://www.threadabead.com/4647/1/Skeleton-Pen-Topper-Pattern-Bead-Pattern

Skeleton Pen Topper makes an excellent quick beaded gift for your friends and co workers this Halloween. Skeleton pen topper has been made to fit on a medium crystal bic biro – however the pattern can be easily modified to use with many different types of pens. As you twirl the pen, the Skeleton's arms and legs move and he will be sure to amuse the recipient of the pen. This Skeleton Pen Topper bead pattern is made using Japanese Miyuki size 11 Delica beads and Brick Stitch is used. It is assumed the beader will be familiar with Brick stitch. Brick stitch bead instructions are available free on www.threadabead.com. Please note the pattern may not work with any other size and type of beads. There are 4 colours in total and the finished beadwork is approximately 2.25cm x 4.5 cm. 4 x 4mm chalk white firepolished crystals are also required. The bead pattern supplied is 9 pages and includes a colour chart of suggested delicas, a colour pattern and a numbered coloured pattern.

Wednesday, 28 September 2016

Dracula Pen Topper Pattern

ThreadABead daily pattern Dracula Pen Topper Pattern online at http://www.threadabead.com/4658/1/Dracula-Pen-Topper-Pattern-Bead-Pattern

Dracula Pen Topper makes an excellent quick beaded gift for your friends and co workers this Halloween. Dracula pen topper has been made to fit on a medium crystal bic biro – however the pattern can be easily modified to use with many different types of pens. As you twirl the pen, the Dracula's arms and legs move and he will be sure to amuse the recipient of the pen. This Dracula Pen Topper bead pattern is made using Japanese Miyuki size 11 Delica beads and Brick Stitch is used. It is assumed the beader will be familiar with Brick stitch. Brick stitch bead instructions are available free on www.threadabead.com. Please note the pattern may not work with any other size and type of beads. There are 7 colours in total and the finished beadwork is approximately 2.25cm x 4.5 cm. 2 x 4mm crystal ab & 2 x 4mm jet firepolished crystals are also required. The bead pattern supplied is 9 pages and includes a colour chart of suggested delicas, a colour pattern and a numbered coloured pattern.

Tuesday, 27 September 2016

Mini 3D Beaded Halloween Witch Earrings Pattern

Mini 3D Beaded Halloween Witch Earrings Pattern bead pattern http://www.threadabead.com/4682/1/Mini-3D-Beaded-Halloween-Witch-Earrings-Pattern-Bead-Pattern

What Halloween outfit wouldn't be complete with these adorable little mini Witch earrings! Using just a few beads and findings, these little earrings are so quick to make up, taking only about 1 hour to create. As usual with ThreadABead featured patterns we give full detailed photographic instructions and in this pattern there are 26 detailed steps, making this pattern even suitable for beginners to beading. This earring bead pattern is made using Japanese Miyuki size 11 Delica. A form of Round Peyote stitch is used but full detailed instructions are given and no previous knowledge of the stitch is required. Please note the pattern may not work with any other size and type of beads. There are 6 delica colours in total and the finished beadwork is approximately 1.4mm x 2.5mm. 2 x 6mm Clear Crystals, 2 x 8mm Clear Crystals, 2 x Head Pins, 2 x Earring Findings are also required. The bead pattern supplied is 9 pages and includes 26 full colour photo instructions.

Monday, 26 September 2016

Frankenstein Pen Topper Pattern

Just added new bead pattern Frankenstein Pen Topper Pattern visit http://www.threadabead.com/4659/1/Frankenstein-Pen-Topper-Pattern-Bead-Pattern

Frankenstein Pen Topper makes an excellent quick beaded gift for your friends and co workers this Halloween. Frankenstein pen topper has been made to fit on a medium crystal bic biro – however the pattern can be easily modified to use with many different types of pens. As you twirl the pen, the Frankenstein's arms and legs move and he will be sure to amuse the recipient of the pen. This Frankenstein Pen Topper bead pattern is made using Japanese Miyuki size 11 Delica beads and Brick Stitch is used. It is assumed the beader will be familiar with Brick stitch. Brick stitch bead instructions are available free on www.threadabead.com. Please note the pattern may not work with any other size and type of beads. There are 7 colours in total and the finished beadwork is approximately 2.25cm x 4.5 cm. 2 x 4mm green emerald and 2 x 4mm jet firepolished crystals are also required. The bead pattern supplied is 9 pages and includes a colour chart of suggested delicas, a colour pattern and a numbered coloured pattern.

Sunday, 25 September 2016

Santa in Sleigh Bracelet

Superb new bead pattern added, look at Santa in Sleigh Bracelet from http://www.threadabead.com/4210/1/Santa-in-Sleigh-Bracelet-Bead-Pattern

This Santa in Sleigh bead pattern is made using Japanese Miyuki size 11 Delica beads and peyote or brick stitch can be used. It is assumed the beader will be familiar with either Brick, Peyote or Both. Peyote and Brick stitch bead instructions are available free on www.threadabead.com. Please note the pattern may not work with any other size and type of beads. There are 13 colours in total and the finished beadwork is approximately 16.537 cm x 1.755 cm. (13 count) The bead pattern supplied is 7 pages and includes a colour chart of suggested delicas, a colour pattern and a numbered coloured pattern.